10.1.1.1 IP Admin Login Guide, Username and Password: We are living in the era of the internet where you can have internet access at almost every single part of the world and it became possible due to network devices we use nowadays. The network is provided by IP address and Router. IP stands for Internet Protocol and Address is the part that tells us that it is a unique protocol of number assigned to every networked device to know the host and easily locate their access.
These network accesses are then directed to their respective places of work by the help of routers, a networking device which is used to exchange and analyze information and then build and send them to their determined locations.
There is a large scale need of internet in private and public manner so, there is a range set up by IANA which includes IP address such as 10.1.1.1, 192.168.2.1, 192.168.1.1 and many more which are default private IP address in router manufactured by companies.
Contents
What is 10.1.1.1 IP Address?
10.1.1.1 is a private IP address mainly assigned to the LAN (Local Area Network). It is used as a default IP address in various routers such as, Siemens, Actiontec and Windstream. It is popularly used for the configuration of IP addresses that are used in the router at home, office, workplaces. Linksys used 10.1.1.1 for the first time and found its application in many networking devices by other organizations such as NetGear, D-Link, Huawei and others.
Features of 10.1.1.1 Default IP Address
1. Apart from confuguring the local IP address of the routers 10.1.1.1 is used to configure all of your devices to the router.
2. It is the admin panel and without this P address one cannot change the configuration of the devices which are connected with the router.
3. It uses data cables so the transmission of data is much better than the rest of the IP address.
How to Login into 10.1.1.1 Admin Page
Admin Login to 10.1.1.1 is easy and anyone can do it. You just have to know the username and password of the router to login to the admin panel. If you do not have information regarding the default username and password you can search for it on the label or can look in the table given below of some common Frontier FiOS router’s usernames and passwords.
| Frontier FiOS Router Model | Username | Password |
| Actiontec F2250 | admin | admin |
| Actiontec GT784WNV | admin | password |
| Actiontec WR424 (E, F and I) | admin | password or password1 |
| Arris NVG443B, NVG448B, NVG448BQ, NVG468MQ | (prompted) | (prompted) |
| Arris NVG589 | (prompted) | (prompted) |
| D-Link DSL-2750B | admin | (from sticker) |
| Greenwave G1100 | admin | (from sticker) |
| Netgear D2200D | admin | admin |
| Netgear 7550 | (prompted) | (prompted) |
| Pace 4111N, 5031NV, 5168NV | admin | (from sticker) |
Login to the IP address using the following steps:
Step 1 – Type 10.1.1.1 in the browser address bar.
Step 2 – A new prompt window would open asking for entering the username and password to login.
Step 3 – Type the default username and password if you have not changed it earlier and select login → OK.
Step 4 – After the login a new window would open providing you access to change and customize the setting of your router.
Step 5 – Change the settings you want to change and then Save → Restart.
How to Find Your Router’s IP Address?
The router’s IP address can be easily found and is also available in a lot of places. You can either find it at the user manual of the router or at the sticker at the back of the router.
The user manual of the router has all the information you need to know about your device and it also comprises of your default username and password which could always be recovered after resetting the device.
The sticker at the back of the router just like the user manual has the default username, password and IP address.
Apart from the above mentioned ways we can also find the IP address online in the internet and also through our device which is connected to it. For example if you are using Windows, you can simple open the command prompt and type ‘ipconfig‘ in it and press Enter. The IP address would be next to the Default Gateway.
How to Change Your Router’s IP Address?
Due to confliction in the IP addresses as they are the same, we can opt to change the IP address. The steps to change the default IP address are given below:
Step 1 – Open the admin page of the IP address of the router by accessing your device.
Step 2 – Login to the 10.1.1.1 IP admin.
Step 3 – Open the settings.
Step 4 – Select the LAN tab in it and configure the IP address.
Step 5 – Type the new IP address and then click OK.
Step 6 – Save the changes.
Step 7 – The IP address had been changed now. Login to your router using the new IP address next time.
Conclusion
IP address is an important part of network and you can now have access to it and change it the way you need.
